What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 30.06.2025 07:01

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

(Dc diagram shown, AC is similar).

If you were president, how would you make America "great again?"

2024–10–10[John johnson John Johnson ]

The MOV will conduct when the voltage exceeds 50% of line voltage.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

BYD sells 382,476 NEVs in May, overseas sales hit new high - CnEVPost

so, what happens?

What does a fuse do?

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

MindsEye Developer Build A Rocket Boy Begins Layoff Process Amid Disastrous Launch, Studio Sources Say - IGN

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

But it can get overloaded, and no longer works.

[image of Common-mode choke]

Jordan Ott hiring strengthens questions on Suns’ decision-making tree - Arizona Sports

These devices are installed between the “hot” and “neutral” and protective ground.

There are two important concepts here.

2024–10–16 [ OO OLAOYE OYEBODE ]

NASA discovers that Earth's twin planet, Venus, is not geologically dead - Earth.com

First Sentence:

What is lightning?

what exactly is a ‘surge’ protector?

Race and genetics do not line up well, new study confirms - Live Science

These are simplified answers to the original question, and does not change anything I wrote above.

For this case there are devices called Metal oxide varistors (MOV).

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Psyche keeps its date with an asteroid, but now it’s running in backup mode - Ars Technica

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

At least they know the answer if they wanted it.

2024–10–14 [Omar Gharbi Omar Gharbi ]

What's the most impressive feature of Claude AI according to its users?

but this device (an Inductor) … impedes the rapid changes in the current.

An AC voltage/ current source, and an ac inductive load.

Now when you have a certain ac resistance, then a current flows in a loop.

Lake Tahoe: 'The water was just screaming,' says witness of boat tragedy that killed eight - BBC

There are three different concepts here that are getting confused.

The bolt then partially travels down the line to your home.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

Why are Republicans so afraid of a strong leader like Vice President Kamala Harris? Are they worried if she becomes President she will make them look stupid?

eight

In schematic diagrams this is the symbol for a fuse:

One

Why do Democrats look like snowflakes and Republicans look like Vikings?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

This is where this question deviates from being a 'generic' question, and becomes more specific.

Upvotes:

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

A fuse is a non-resetable over current circuit protector.

but I think this circuit , shows a few more pieces.

a photo is worth a thousand words.

This is where the MOV conducts again, and dissipated the energy.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This device then solves the entire problem.

It seems Mohan does not understand the difference between a comment and an Answer.

This one hit behind the barn.

The third is lightning and “how it gets conducted into a home.”

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

the problem then depends on "how fast does the fuse operate?".

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

This is 'the assistant's answer'

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

nine

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

One is “what exactly is in a ‘surge protector’ ? ”

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Because the load is inductive, the current lags the voltage.(by a bit).

The other is “what does a “fuse” do?”

But… the neutral is now “floating” because of the 1 ohm resistance.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

A circuit breaker is similar, but is resettable.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Barnstars:

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

It also is a device that limits the change in current flow.

He then asserts :

Here is a simplified AC power diagram.

He then describes Rainy Season and Lightning.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

[old diagram got deleted by accident]

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

So, the voltage could go up to 500 volts, and the fuse will not open up.

At one ohm, the resistor has a maximum of 1 watt power.

I post the exact comment here.

Edit 2024–10.

He then describes the function of a fuse.